Settings
Manage your aquariums and account preferences
1 of 10 aquariums
Aquariums Tank setup Account
Tank · Demo Reef
Switch aquariums from the picker in the sidebar. Rename, duplicate or delete in Aquariums.
Targets & Test KitsNew
↺ Reset all to defaults
Click any pill to set its range and the test kit you use — the kit shows as a small badge on your dashboard.
Tolerable 6.0–12.0 dKH Ocean ~6.5 dKH
Tolerable 370–600 ppm Ocean ~420 ppm
Tolerable 1200–1450 ppm Ocean ~1280 ppm
Tolerable 1.023–1.028 sg Ocean 1.025-1.027
Tolerable 74.0–84.0 °F Ocean variable
Tolerable 7.6–8.65 Ocean 8.0-8.3
Tolerable 1.0–100.0 ppm Ocean <0.1 ppm
Tolerable 0.02–0.5 ppm Ocean ~0.005 ppm
Tolerable 0.0–0.5 ppm Ocean ~0 ppm
Tolerable 0.0–0.1 ppm Ocean ~0 ppm
Tolerable 200–450 mV Ocean ~400 mV
Dimensions & Volume
→ Enter dimensions to compute
Leave blank to use the calculated volume. Use this if your tank has rockwork or unusual geometry.
Adds to effective system volume for dosing math.
Return pump
With an Energy Bar measuring the pump, Tank Overview estimates its flow and turnover from the watts it draws.
Return plumbing: pipe, elbows, valves and nozzles cost head as flow rises; pick your tank's stock plumbing to count it. Head height: from the sump's water line up to where the water returns. Watts at 100%: set the pump to full speed for a moment and read its outlet's watts in your controller (the same meter ReefCMD records).
Water Type
Sets the default parameter targets below. Customize any value to override.
Tank Status
How long your tank has been running.
Set manually until a controller is connected.
Timezone
Used for log day-grouping, "Today"/"Yesterday" labels, and Apex/Bridge sync timestamps.
Cancel