Power charts
8 outlets stopped reporting
Return Pump, Heater, Skimmer, Display Light, Refugium Light, Gyre, ATO, Chiller last sent a reading 22 hours ago, while the other outlets on this controller kept reporting — so the Bridge itself is fine.
Moved the equipment off the Energy Bar, or unplugged them for good? Turn the outlet off in Manage outlets and this notice stops. Their history is kept, and a re-sync will not turn the outlet back on.
Still plugged in? Re-run discovery from that same screen to see what your controller reports now — an outlet renamed on the controller comes back as a new one to map. If it is not listed at all, check the module it lives on.
Moved the equipment off the Energy Bar, or unplugged them for good? Turn the outlet off in Manage outlets and this notice stops. Their history is kept, and a re-sync will not turn the outlet back on.
Still plugged in? Re-run discovery from that same screen to see what your controller reports now — an outlet renamed on the controller comes back as a new one to map. If it is not listed at all, check the module it lives on.
Return Pump
100 W
Stopped reporting 22 hours ago
Heater
0 W
Stopped reporting 22 hours ago
Skimmer
41 W
Stopped reporting 22 hours ago
Display Light
0 W
Stopped reporting 22 hours ago
Refugium Light
0 W
Stopped reporting 22 hours ago
Gyre
34 W
Stopped reporting 22 hours ago
ATO
0 W
Stopped reporting 22 hours ago
Chiller
637 W
Stopped reporting 22 hours ago
Power draw per outlet, in watts. Tap a name to hide or show that outlet.
ATO run time
Averaging 89 min/day over the last 3 full days. A steady climb means more evaporation, a leak, or a float that stopped closing; a drop to zero usually means the reservoir is empty.
11-11
31 min
11-10
30 min
11-09
206 min
Estimated from how often the pump was drawing power when we sampled it — a fill lasts seconds, so this is a reliable daily total rather than a count of individual top-offs. Faded bars are days we heard less from your controller.
thanks — we read every one